Outdoors
Sponsored by

FS: 257wby package

3,485 Views | 17 Replies | Last: 4 mo ago by cledus6150
cledus6150
How long do you want to ignore this user?
AG
Selling my Weatherby vanguard accuguard in 257wby, this rifle is a tack driver but alas I want to build a shorter 25cal rifle to suppress. See the note in the photo for all of the info on the rifle

SOLD




EspejoAg
How long do you want to ignore this user?
AG
Cledus - wondered if I could ask a question. I have a 257 Weatherby and I've been reloading for it for several years.

I'm tryin' to get some 115 grainers to shoot and have gotten pretty good results with RE-25 - but it's temp sensitive and it gets a little too warm in hot weather.

What powder are you using? 3390 is great FPS and what I'm looking for.

I've dropped back a bit to the 92 grain Hammers and they are flat awesome (right at 3590 fps) - but I want a 115 load. Just haven't been able to get a consistent load.

I'd appreciate any help - looks like you've got a real winner with the Accuguard / Scope combo - GLWS !
cledus6150
How long do you want to ignore this user?
AG
Yeah no problem, I will preface please work up to this load!

Barnes 115tsx @3.245" with 67.5gr RL-22, GM215m primer

I use to run 69.5gr which was 3,471fps, but when out in Rocksprings during the summer and chasing axis I got heavy bolt lift and very flattened primers. So I backed off a bit and haven't had any problems with pressure signs or temp sensitivity. I have used that load from 105 in west Texas to 30 in central Texas and then in the 40's in the high plateaus of Northern New Mexico @ 9,000' of altitude.
cledus6150
How long do you want to ignore this user?
AG
I will add all loads and testing done was with a SiCo Hybrid on the rifle!
EspejoAg
How long do you want to ignore this user?
AG
Awesome!

I had the same issue with IMR 7828 in some loads on 120 Partitions, and got heavy bolt lift as well.

I ended up using 110 AccuBonds with H-1000 - used it in West Texas - the Hill Country, & in Central N Mexico.

Muleys & whitetail never knew what hit 'em and never went more than a few yards.

Many thanks for taking the time to share your experience.
tx4guns
How long do you want to ignore this user?
AG
Bumping this for Cledus. I've seen first hand what this rifle can do,and seen him make some incredible shots on Axis with it. This rifle drives tacks. Somebody buy it.
cledus6150
How long do you want to ignore this user?
AG
Bump
Furlock Bones
How long do you want to ignore this user?
AG
Is this the same gun that I borrowed off of you when mine scope mounts failed on the NM antelope hunt?
cledus6150
How long do you want to ignore this user?
AG
Yep
Saltwater Assassin
How long do you want to ignore this user?
AG
One of the best rifles in THE best caliber available.

Someone buy this gun.
cledus6150
How long do you want to ignore this user?
AG
Bump
cledus6150
How long do you want to ignore this user?
AG
Bump
cledus6150
How long do you want to ignore this user?
AG
Price reduced to 2k and will split rifle/ammo from scope and rings.
OhAggie98
How long do you want to ignore this user?
AG
If you're willing to part with the ammo and brass, I'd be interested in them. I recently acquired my own 257 WB mag and plan on loading for it. I would plan on unloading the loaded rounds and loading for my rifle, so I'm not worried about them being too hot for a different rifle than yours.
cledus6150
How long do you want to ignore this user?
AG
I'd have to have some one that bought the rifle before I'd sell the brass and dies separate .
OhAggie98
How long do you want to ignore this user?
AG
Understandable.
cledus6150
How long do you want to ignore this user?
AG
Bump
cledus6150
How long do you want to ignore this user?
AG
Bump
Refresh
Page 1 of 1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.