Took my truck (2015 Tacoma) in for an oil change on Friday at the normal shop I use and it appears they overfilled the oil by a quart.

Noticed a bit of a pulsation or vibration at idle after the change so I took it back in today and they redid the oil change.

Drove ~150 to 200 miles on it over the weekend. Should I be worried about the longevity of the engine / issues?

I've never heard of too much oil being a problem.

Generally, the 'correct amount' should end up in the middle of the safe zone on the dipstick. I need to add at least 1.5 qts to get to the top of that zone, 2 qts would be over. Neither would concern me any. In fact, I generally use the dipstick as the metric, not how many qts. Obviously a smaller engine/pan will dictate how much is too much. But if they fixed it and its now right, send it.

Aggie71013 said:

---

Took my truck (2015 Tacoma) in for an oil change on Friday at the normal shop I use and it appears they overfilled the oil by a quart.

Noticed a bit of a pulsation or vibration at idle after the change so I took it back in today and they redid the oil change.

Drove ~150 to 200 miles on it over the weekend. Should I be worried about the longevity of the engine / issues?

---

Only if you hit a low oil pressure point from foaming.

Check engine light or low oil pressure never came on while driving. Other than the slight vibration at idle I never noticed anything.